Previous Article Next Article Avoid Short Circuits and Overheating Wires With a Quality Electrical Installation
Posted in Electrical Services

Avoid Short Circuits and Overheating Wires With a Quality Electrical Installation

Avoid Short Circuits and Overheating Wires With a Quality Electrical Installation Posted on July 15, 2019

Electricity is one of the most dangerous elements in a home. This is partly because electricity can be easily shorted between an outlet and a ground source which could result in a severe shock or a flash fire. In fact, these are a few of the primary reasons for hiring an expert for any type of Electrical Installation. Another good reason is that the contractor can handle most of the paperwork and inspections that electrical repair or installation may require. This is not an area to skimp on because a poorly installed electrical system can quickly become a hazard.

Other hazards that might require a replacement Electrical Installation include faulty breakers and old wiring. Wire degrades over time and electrical current speeds that degradation along. As the wire ages, it gains resistance to the current passing through it. This can cause the wire to heat up, just like the element on an electric stove. If this occurs inside the walls, there is a good chance that the hot wires will start a fire and an even better chance that smoke and fumes from the area will cause problems as well. Very few people can handle the acrid smell of melting plastic and insulation that comes from overheated wires. Click here for more information on electrical installation in Wilkes-Barre PA.

Of course, not all installations are complete replacements. Consider the case where outdoor lighting needs to be installed. The electrician can add a unique circuit to handle the task, but they will need to run custom wiring to the outside of the home. Because the wires and light fixtures are placed outside, they must be water resistant to prevent shorts or other problems. This is a crucial step because using the wrong equipment could easily damage the whole system.

Other installations include the replacement of wires in a home remodel. This is often necessary to avoid excessive splicing of circuits. Plus, many remodels tend to require new wiring, especially in kitchen areas. Kitchens and bathrooms are two of the areas that require special care. That is, the contractor will need to install GFIC (Ground Fault Interrupt Circuit) outlets for additional protection from shorts or water faults. These are required by code for any room that has running water including laundry rooms or mud rooms. Visit Quality Electric to get more details.

Be the first to like.

Pin It on Pinterest

Shares
Share This