If someone finds that their toilet has become clogged, they will most likely want to have the problem alleviated promptly. There are a few tricks that can be tried at home before calling in a professional plumber.
First, the water should be turned off so there is no chance of an overflowing mishap. The water supply valve is located on the wall directly behind the toilet. It should be turned to the right so the water will not reach the tank as repair work is being done.
Many people find that plunging a toilet is a successful way to remove a clog. The rubber flange of the plunger should be positioned over the hole in the tan. Pressure can be applied so the flange is sealed over this hole. Push the plunger down and then pull it up without releasing the seal. This should be done several times very quickly, in a pumping motion. When the seal is broken, try flushing the toilet to see if the contents go down. The water will not overflow because it had been shut off.
If plunging did not work, try using a plumber’s snake to dislodge the matter from obstructing the piping system. This piece of equipment is fairly easy to use. The end of the metal tool is placed toward the obstruction in the toilet. The snake is unwound from a reel so it winds its way into the hole, possibly moving lodged matter out of the way in the process. Remove some of the water from the bowl before turning the water supply back on. Try flushing after removing the snake to see if the obstruction has been moved.
If these methods do not work, help from a Plumber in Bremerton WA may be needed. They will be able to come to the rescue quickly. It is best to have a professional take a look at the clogged toilet rather than taking a risk in making the situation worse. When people add chemicals to their toilets to try dislodging matter, it could have dire consequences to their septic and piping system. A professional would have commercial grade products that are safe to use.
