When one has a home within city limits, it is likely that their plumbing system is connected to the local sewer system. When one lives outside of the city limits, they may have a septic system instead for eliminating waste water. It is important to keep these systems properly maintained in order for them to always be functioning properly. When they are not properly maintained, it can lead to a lot of problems which can be extremely expensive to repair. It could even mean that septic tank replacement is necessary, which involves a lot of work and is very costly.
One thing that can help to prevent problems with septic pumping in Ferndale WA is to make sure that the system is installed properly in the first place. Before installation, a percolation needs to be done on the soil. This test shows how much time and space is needed for the soil to be able to clean drainage water. If the soil doesn’t allow for enough waste water to go through, it can mean that approval for installation will be denied. If the tests show that everything is okay, homeowners can go ahead and have septic systems installed. Proper installation will cut down on the need for repairing Septic pumping in Whitehouse Station.
One of the main reasons homeowners need septic pumping repair in Ferndale WA is when there are overflows. It is important to install a tank that is the right size for the usage it is going to see. For instance, if a home has one or two occupants, the septic tank will need to hold at least 900 gallons. If there are more occupants, the tank will need to be larger. It is easy to tell if there is an overflow, because there will be an odor that goes along with it. This can be avoided when water use is limited, and when the tank is emptied regularly. Septic pumping repair in Ferndale WA should be emptied every three years if there are four or more people in the home and the tank is 1,500 gallons, and every 11 years for a 900 gallon tank used by one or two people.