Central systems for Heating And Air Conditioning in Neenah WI use the same air exchanger and duct work to move warm and cool air through the home. They also share the same air filter, an aspect which people often don’t consider in regard to air conditioning. It may seem that since the central air generally runs much less frequently than the furnace does, that nobody needs to check or change the filter over the summer. However, it’s important to continue monitoring the condition of the filter every month and change that device if it’s noticeably dirty.
A technician with a service for Heating And Air Conditioning in Neenah WI can answer questions about the best filter to use. Some people become interested in the denser, more expensive versions since those filters are more effective at ridding the home of allergens in the air. However, not every top-quality filter is suitable for the equipment. For example, the blower must provide a strong enough airflow for this to be an appropriate choice. In contrast, technicians generally recommend not using the cheapest filters, which are flat and made of fiberglass. They simply don’t do a very good job. At a minimum, an inexpensive pleated version is advisable, and it should be checked at least once a month.
Dirty filters restrict airflow and make the furnace and central air conditioner work harder. That increases the electric bill and puts extra wear and tear on the equipment. Technicians from companies like Bob’s quality heating & cooling have encountered extremely dirty air filters, clogged with dust, pet and human hair, and other debris. In the worst-case scenario, the filthy filter can cause the system to break down because it puts forth so much effort to reach the designated temperature.
No matter how dirty the filter is, the equipment should never be run without one. A homeowner may be alarmed at the sight of a white filter that has turned dark gray and has obvious thick areas of dust, but it’s better to keep that filter in the compartment until a trip to the store can be managed. Otherwise, all the debris drawn in through the return-air registers winds up inside the furnace.
